Skip to content
+91 83205 96466
Aditya Energy logo
A three-phase power transformer under assembly on the Aditya Energy shop floor in Vadodara, its radiator fins and HV bushings lit against the workshop.
GETCO · MGVCL · PGVCL approved · Est. 2017

Engineering Power.
Built in Gujarat.

Power and distribution transformers up to 8000 KVA — wound, assembled and tested to 33 kV on our own floor in Vadodara.

Request a QuoteView Transformers
  • 8000KVAMaximum capacity
  • 33kVIn-house test bay
  • 100+Qualified team
  • 2017Manufacturing since
Two Aditya Energy engineers inspecting a power transformer on the assembly floor in Vadodara.
100+Qualified team
Welcome to Aditya Energy

Quality-conscious power equipment, engineered in Vadodara.

We build power and distribution transformers up to 8000 KVA, wound, assembled and high-voltage tested on our own floor in Vadodara since 2017.

The range extends to inverter-duty and dry-type transformers, servo voltage stabilizers, and LT/HT panels with substation automation.

01

Advanced technology

CRGO cores, modern winding lines and vacuum oil processing.

02

Expert engineers

Design, winding, assembly and testing, handled by our own team.

03

Quality assurance

Routine and type tested to IS 2026 on our own floor.

About the company

Transformers

The core of what we manufacture. Every unit engineered to your rating, voltage class and cooling requirement.

View all transformers

Power Transformer

For generating stations and heavy industrial plants, where an unplanned outage is measured in lakhs per hour.

Rating
0-0 MVA
Class
0 kV

Distribution Transformer

The final step-down to your loads, built to the utility approvals your connection actually requires.

Rating
0-0 KVA
Class
0 kV
Our products

High quality products

Each transformer is subject to all routine tests as per IS 2026 / IS 1180. On specific requirement, units can also be put through type tests and special-purpose tests.

From design to dispatch

Six stages, all under one roof in Vadodara. Nothing critical leaves the floor.

  1. Stage 01

    Design

    Sized to your load profile and site conditions, not a catalogue number.

  2. Stage 02

    Core and winding

    CRGO laminations; spiral, cross-over, helical or continuous disc windings.

  3. Stage 03

    Assembly

    Coil clamping, core-coil assembly, tanking and electrical brazing in-house.

  4. Stage 04

    Oil filtration

    4.5 KL mobile filtration plant, on the floor or on your site.

  5. Stage 05

    Testing

    Routine and type tests to IS 2026 in our own 33 kV bay.

  6. Stage 06

    Dispatch

    Installed and commissioned with our engineers present.

The plant

We do not sub-contract the part that matters.

Core cutting, winding, assembly, oil filtration and high-voltage testing all happen on our own floor in Vadodara. That is why we can hold a delivery date and stand behind a test certificate.

See our capabilitiesQuality and testing
In-house test bay
up to 33 kV
Winding machines
to 12 tons
Overhead crane
15 tons
Mobile oil filtration
4.5 KL
Maximum capacity
8000 KVA
Capability at a glance

The numbers a spec engineer checks first.

0 KVAMaximum capacity
0+Qualified team members
0+Customers served
0 kVIn-house testing class

Also manufactured

Alongside transformers we build the voltage stabilisation and switchgear that sits around them.

Servo Voltage Stabilizers

Air-cooled, oil-cooled, linear and HT AVR. Holds output within one percent for CNC, pharma, telecom and cold storage loads.

2 kVA to 250 kVA

Electrical Panels

VCB, load break switch, automatic power factor correction and power distribution boards, built to your single line diagram.

LT and HT

Built to standard

Design conforms to IS 2026, IEC 60076 and ANSI. Every unit is routine-tested before it leaves the floor.

IS 2026IEC 60076ANSIGETCO ApprovedMGVCL ApprovedPGVCL Approved

Industries we serve

Steel and Foundry
Cement
Pharmaceuticals
Solar and Wind
Utilities
Textiles
Cold Storage
Infrastructure
Global reach

Built in Vadodara. Commissioned across East and Central Africa.

Every unit is wound, assembled and high-voltage tested on our own floor in Gujarat, then shipped, installed and commissioned on site. The ratings below are units actually delivered.

  • 4 countries supplied
  • India — GETCO, Waaree Energies, Briskon and ChargeZone — 66 kV and 11 kV class projects.
  • Uganda — Shree Hari Impex, Kakira Sugar and Yogi Steel — 4600 to 10000 KVA, 33 kV class.
  • Republic of the Congo — Excelsource — five units, 1600 to 5200 KVA, 11 kV class.
  • Tanzania — Excelsource — 2500 KVA, 33/0.433 kV.

Exports are handled under our Importer-Exporter Code registration with the DGFT.

Certified and approved

Every approval on this page is a real document. Open any card to read the full certificate.

In their words

What our customers say.

Plant engineers, EPC contractors and utility buyers on working with Aditya Energy.

PLACEHOLDER — replace with a real, written-approved customer quote about transformer quality and on-time delivery. Do not publish this text.

CN
Customer nameDesignation, Company nameCity, State

PLACEHOLDER — replace with a real, written-approved customer quote about testing, documentation and commissioning support. Do not publish this text.

CN
Customer nameDesignation, Company nameCity, State

PLACEHOLDER — replace with a real, written-approved customer quote about after-sales service and oil filtration on site. Do not publish this text.

CN
Customer nameDesignation, Company nameCity, State
01 / 03
Questions, answered

What buyers ask us before they order.

Ratings, approvals, testing and lead time — the things a spec engineer checks before a purchase order is raised.

07 questions

Not covered here? Send us the rating, voltage class and application, and one of our engineers will come back to you within a working day.

Ask our engineers

  • We manufacture power and distribution transformers up to 8000 KVA, wound and assembled on our own floor in Vadodara. The range covers oil-filled and dry-type units, along with inverter-duty and furnace transformers built to the rating, voltage class and cooling arrangement your site requires.

Tell us the rating. We will quote it.

Send the KVA or MVA rating, voltage class and application. You get a response within one working day.

Request a QuoteWhatsApp EnquiryAbout the company